The small vertical packaging machine needs to be cleaned in the process of use to keep the machine clean. The following is to introduce the lubrication and cleaning methods and steps of the small vertical packaging machine. The specific points are as follows:
1、 This paper introduces the lubrication and cleaning methods of small vertical packing machine.
First of all, oil lubrication should be added to the gear mesh, bearing oil filling hole and moving parts regularly, once per shift.
Secondly, the reducer is strictly prohibited to run without oil. After 300 hours of operation for the first time, clean the inside and replace with new oil, and then change the oil every 2500 hours.
Finally, when adding lubricating oil, please pay attention not to drop oil on the drive belt, in order to prevent slipping and loss of rotation or premature aging and damage of the belt.
2、 For you to explain is the small vertical packing machine cleaning.
First, clean the metering part in time after shutdown. For the packaging materials with high sugar content such as granules, ensure that the turntable and blanking door are cleaned in each shift.
Secondly, clean the heat sealer body frequently to ensure that the sealing lines of finished packaging bags are clear.
Thirdly, the scattered materials should be cleaned up in time to keep the machine clean, so as to prolong the service life.
Fourth, clean the light emitting head of photoelectric switch (electric eye) frequently to ensure its reliable operation.
Fifth, often clean the dust in the electric control box to prevent short circuit or poor contact and other electrical faults. Large vertical packing machine